文章摘要
尹佳芝,林永权,邓 恺.低温条件下水泥早强性能提升方法探究[J].水泥工程,2025,38(3):42-46
低温条件下水泥早强性能提升方法探究
Study on methods to enhance early strength of cement under low-temperature conditions
  
DOI:
中文关键词: 早强剂  水泥早期强度  低温条件  高标号水泥
英文关键词: early-strength agents  cement early strength  low-temperature condition  high-grade cement
基金项目:
作者单位
尹佳芝 华润水泥技术研发(广西)有限公司 
林永权 华润建材科技控股有限公司 
邓 恺 华润建材科技控股有限公司 
摘要点击次数: 0
全文下载次数: 0
中文摘要:
      装配式建筑的快速发展,对低温条件下的混凝土早强有了巨大需求。本文研究了使用不同水泥品种,降低水泥细度,使用单一或复合早强剂等方法,对低温(10 ℃)条件下水泥早强性能的影响,从而探究低温条件下实现水泥早强的方法。结果表明,使用高标号水泥,并适当降低水泥细度,然后搭配使用纳米水化硅酸钙(C-S-H)晶核剂,可以大幅提高水泥的早期强度。在10 ℃条件下,使用比表面积为462 m2/kg的P·Ⅱ 52.5R水泥,并搭配使用1%掺量的纳米晶核剂,则水泥胶砂强度可在6 h内达到10.7 MPa,相比空白控制样,强度提高10.7 MPa,强度达到10 MPa的时间至少提前10 h。
英文摘要:
      The rapid development of prefabricated buildings has created a significant demand for early-strength concrete under low-temperature conditions. This study investigates the effects of different cement types, reduced cement fineness, and the use of single or composite early-strength agents on the early strength of cement at low temperatures (10 ℃), aiming to explore the methods for achieving early strength of cement under low temperature conditions. The results indicate that using high-grade cement with appropriately reduced fineness, combined with nano calcium silicate hydrate (C-S-H) nucleation seeds, can significantly enhance the early strength of cement. At 10 ℃, when P·Ⅱ 52.5R cement with a specific surface area of 462 m²/kg is used along with 1% nano nucleation seeds, the cement mortar strength can reach 10.7 MPa within 6 hours—an increase of 10.7 MPa compared to the blank control sample. Additionally, the time required to achieve 10 MPa strength is reduced by at least 10 h.
查看全文   查看/发表评论  下载PDF阅读器
关闭