| 潘胡江,吴德进.基于有限元分析的辊压机辊面柱钉
排列方式优化设计[J].水泥工程,2025,38(3):23-25 |
| 基于有限元分析的辊压机辊面柱钉
排列方式优化设计 |
| Optimization of pin arrangement on the roll surface of a roll crusher based on finite element analysis |
| |
| DOI： |
| 中文关键词: 辊压机 辊面 柱钉 有限元分析 |
| 英文关键词: high pressure grinding rolls roll surface column nails finite element analysis |
| 基金项目: |
|
| 摘要点击次数: 0 |
| 全文下载次数: 0 |
| 中文摘要: |
| 针对辊压机在工程应用中出现的辊面脱落或柱钉断裂等现象，本文对辊压机辊面进行了受力分析及有限元分析，获得了辊面应力分布云图和变形分布云图，结合工程工艺需求，对棱柱型柱钉排列方式进行了对比分析。结果表明：棱长为12 mm的柱钉、轴线方向为25/27、环向数量为200时，在深度为40 mm和50 mm柱钉交错排列，凸出辊面高度值为3 mm时比棱长为14 mm时辊面的最大应力和最大变形都有所减少，其方案最优。 |
| 英文摘要: |
| In order to solve the problems of roller surface peeling off or column pin breaking off that often occur in the engineering application of roller press, this paper conducts force analysis and finite element analysis on the roller surface of the roller press, obtains the stress distribution cloud map and deformation distribution cloud map of the roller surface, and conducts a comparative analysis of the arrangement method of the cuboidal column pin with reference to the engineering process requirements. The results show that when the edge length of the column pin is 12 mm, the axial direction is 25/27, the circumferential number is 200, the depth is 40 mm and 50 mm, the column pins are staggered and protrude 3 mm from the roller surface, the maximum stress and maximum deformation of the roller surface are reduced compared with the case of the edge length of 14 mm, and the scheme is optimal. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|