| 葛 晓,徐从战.生料磨立磨改辊压机案例分享[J].水泥工程,2024,37(2):59-62 |
| 生料磨立磨改辊压机案例分享 |
| Case sharing of converting raw material mill from vertical mill to roller press |
| |
| DOI： |
| 中文关键词: 粉磨,辊压机,节能,降碳,效益 |
| 英文关键词: grinding,roller press,energy efficient,carbon reduction,benefits |
| 基金项目: |
|
| 摘要点击次数: 139 |
| 全文下载次数: 0 |
| 中文摘要: |
| 某3 200 t/d熟料生产线生料磨为MLS3626立磨系统。经过十几年运转，故障率较高，系统运行不稳定，维护量较大，为此，实施了辊压机替换改造。生料制备采用辊压机终粉磨系统替换立磨终粉磨系统后，台时产量同比增加了30%，粉磨工段电耗降低了4 kWh/t，具有良好的社会效益和经济效益，为水泥企业提质增效，降耗减排，可持续发展奠定了基础。 |
| 英文摘要: |
| A 3200 t/d clinker production line uses MLS3626 vertical mill system for raw material grinding. After more than a decade of operation, the failure rate is high, the system operates unstable, and the maintenance workload is large. Therefore, a roller press replacement transformation has been implemented. After the final grinding system of roller press was used to replace the vertical mill in raw meal preparation in cement enterprises, the hourly output increased by 30% year-on-year, and the power consumption in grinding section decreased by 4 kWh/t, which has good social and economic benefit. It laid a foundation for cement enterprises to improve the cement quality and efficiency, reduce consumption and emission, and achieve sustainable development. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|