| 吴玉辉.Φ3.8 m×13 m球磨机系统节能技改方案分析及改造效果[J].水泥工程,2023,36(1):26-28 |
| Φ3.8 m×13 m球磨机系统节能技改方案分析及改造效果 |
| Analysis of energy-saving technical transformation scheme of Φ 3.8 m × 13 m ball mill system and its effect |
| |
| DOI： |
| 中文关键词: 辊压机, 预粉磨,水泥磨,开路,闭路 |
| 英文关键词: roller press, pre-grinding, cement mill, open-circuit, close-circuit |
| 基金项目: |
|
| 摘要点击次数: 547 |
| 全文下载次数: 0 |
| 中文摘要: |
| 采用HFCG180-160辊压机预粉磨系统与原有Φ3.8 m×13 m水泥粉磨系统进行配套，球磨机粉磨工艺由闭路改为开路，水泥产品维持比表面积维持不变，粉磨系统产量从85 t/h提高到190 t/h，粉磨工序电耗由38 kW·h/t降低至29 kW·h/t，水泥标准稠度用水量降低2%。 |
| 英文摘要: |
| Use HFCG180-160 roller press pre grinding system and the original Φ 3.8 m×13 m cement grinding system is equipped. The ball mill grinding process is changed from closed circuit to open circuit. The specific surface area of cement products remains unchanged. The output of the grinding system is increased from 85 t/h to 190 t/h, the power consumption of the grinding process is reduced from 38 kWh/t to 29 kWh/t, and the water consumption for cement standard consistency is reduced by 2%. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |