| 陈晶晶,董益名,王 君,许 刚.冷却速度对熟料中阿利特晶型影响研究[J].水泥工程,2021,34(4):1-3 |
| 冷却速度对熟料中阿利特晶型影响研究 |
| Effect of different cooling rates on polymorph of the alite |
| |
| DOI： |
| 中文关键词: 阿利特 硅酸三钙 多晶型 X射线衍射 |
| 英文关键词: Alite tricalcium polymorphism X-ray diffraction |
| 基金项目: |
|
| 摘要点击次数: 368 |
| 全文下载次数: 1 |
| 中文摘要: |
| 在相同煅烧条件下，同一个样品分别经过室温冷却、冷风下快速冷却和在炉子中慢速冷却制得不同熟料。利用X射线衍射技术分析不同冷却速度对熟料中阿利特晶型的影响，实验结果表明：室温冷却和快速冷却制得的熟料中阿利特晶型为M3型，慢速冷却制得的熟料中阿利特晶型为M1型。 |
| 英文摘要: |
| The clinker samples were prepared under the same calcination conditions, but were cooled at room temperature，cooling air and high temperature furnace, respectively. The influence of different cooling rates on polymorph of the alite were analyzed by X-ray diffraction. The results showed: the polymorph of the alite prepared by the first two cooling methods were M3 patterns, the polymorph of the alite prepared by slow cooling was M1 pattern. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |