| 常正安.N-TGD钢丝胶带提升机胶带跑偏
原因分析及故障处理[J].水泥工程,2017,30(2):44-45 |
| N-TGD钢丝胶带提升机胶带跑偏
原因分析及故障处理 |
| Cause analysis and fault treatment of belt deviation in N-TGD wire belt winding machine |
| |
| DOI： |
| 中文关键词: 钢丝胶带提升机 胶带跑偏 允差 车削 |
| 英文关键词: wire belt winding machine belt deviation tolerance turning |
| 基金项目: |
|
| 摘要点击次数: 1895 |
| 全文下载次数: 0 |
| 中文摘要: |
| 针对3台提升机均出现了头、尾轮胶带向同侧或向另一侧严重跑偏的情况，经过反复多次对尾部张紧纠偏装置进行调整，尾轮跑偏虽能恢复，但头轮跑偏情况未能得到丝毫缓解。检查确认，头轮覆胶瓦片出现磨损。为此，对其进行了车削恢复鼓型形状后跑偏情况解除，至今运行良好。 |
| 英文摘要: |
| In view of belt deviation of the head， tail wheel tape to the same side or to the other side in 3 sets of hoist
， adjust the tail tensioning correction device for several times， and tail wheel running deviation can restore， but the situation of head wheel has not been able to get any less.After checking，it is found that rubber tiles of head wheel wear .So the problem is solved by turning to recover drum shape， which is running well. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |