| 李军.QXQ70/24悬臂侧取式刮板取料机行走机构改造[J].水泥工程,2015,28(1):54-55 |
| QXQ70/24悬臂侧取式刮板取料机行走机构改造 |
| Walking mechanism transformation of QXQ70/24 cantilever side-draw scraper reclaimer |
| |
| DOI：10.13697/j.cnki.32-1449/tu.2015.01.018 |
| 中文关键词: QXQ70/24悬臂式取料机 弹性柱销联轴器 减速机 刮板输送机 |
| 英文关键词: QXQ70/24 cantilever side-draw scraper reclaimer elastic pin coupling reducer scraper conveyor |
| 基金项目: |
|
| 摘要点击次数: 1789 |
| 全文下载次数: 0 |
| 中文摘要: |
| 针对某水泥企业一台QXQ70/24悬臂式取料机运行过程中存在行走机构频繁打齿的问题，进行了详细的技术分析与思考；在此基础上，就改造中设备的选型与设计进行了讨论。按所定的方案改造后，该取料机在一年多的生产运行中，其行走机构未再发生打齿故障。 |
| 英文摘要: |
| The frequent tooth breaking problem of the walking mechanism of QXQ70/24 cantilever side-draw scraper reclaimer of a cement enterprise were technically analysed in detail and deeply thought about. On this basis, the equipment selection and design in the transformation were discussed. According to the rebuilding plan, after the transformation, the walking mechanism never encounter tooth breaking problem in a year of production. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |